I will get on the fuel flow tomorrow and will post my results
 |
-
The Best
Past and Present Any Questions................... -
cant use it - who wants it? $30 for the one with harness, $25 for the one with just pigtails
Pete ::::>>> resident LED addict and CFI defector LED bulb replacements
'LTD HPP' 85 Vic (my rusty baby) '06 Honda Reflex 250cc 'Baileys' 91 Vic (faded cream puff) ClifFord 'ODB' 88 P72 (SOLD) '77 LTDII (RIP)
sigpic
85HPP's most noteworthy mods: CFI to SEFI conversion w/HO upperstuff headers & flowmasters P71 airbox Towncar seats LED dash light-show center console w/5 gauge package LED 3rd brake light 3G alternator mini starter washer/coolant bottle upgrade Towncar power trunk pull underhood fuse/relay box 16" HPP wheels - police swaybars w/poly rubbers - budget Alpine driven 10 speaker stereoComment
-
factory shop manual scan courtesy of Rexx
Pete ::::>>> resident LED addict and CFI defector LED bulb replacements
'LTD HPP' 85 Vic (my rusty baby) '06 Honda Reflex 250cc 'Baileys' 91 Vic (faded cream puff) ClifFord 'ODB' 88 P72 (SOLD) '77 LTDII (RIP)
sigpic
85HPP's most noteworthy mods: CFI to SEFI conversion w/HO upperstuff headers & flowmasters P71 airbox Towncar seats LED dash light-show center console w/5 gauge package LED 3rd brake light 3G alternator mini starter washer/coolant bottle upgrade Towncar power trunk pull underhood fuse/relay box 16" HPP wheels - police swaybars w/poly rubbers - budget Alpine driven 10 speaker stereoComment
-
Anyone have any luck adding pin #34 yet?
I clipped an ECM harness off a junker that has the #34 wire w/connector if anyone wants it.
Without it all of the fuel functions of the tripminder wont work.
On a side note I found out why I had to bore out the VSS on mine. Cars with cruise control have a different speedometer cable than those without.
So far after a month and a half it's still working flawlessly, and I'm amazed at how acurate the damn thing is!
-PaulComment
-
naw i havent bother messin wit it in a while.. But if you use that harness dont you have to splice it on wire by wire?The Best
Past and Present Any Questions...................Comment
-
Nope... All you'd have to do is add the one single pin to your existing ECM connector.naw i havent bother messin wit it in a while.. But if you use that harness dont you have to splice it on wire by wire?
The harness I clipped has thePIN #34 wire w/factory connector.Comment
-
You will have to break that covering over the harness to add it thou right?The Best
Past and Present Any Questions...................Comment
-
No.. You shouldn't have to. It just snaps off.
So pop it loose, and slide it up aling the wires enough to give you room. You will however have to drill a small hole to slide the wire through.Comment
Comment