Coach lamp removal?

[Hearsesrock427]

Things are coming along with the slicktop conversion! Have all tiara bar/middle roof trim stuff removed. Want to get the last of the vinyl top off that the coach lamps (which appear to be screwed into the B pillar from the inside) before buttoning everything back up. From what I've seen there are two screws- I can feel one of them but I can't find the other one. Imagine a pair of vice grips or something would be useful to unscrew these, because I don't feel a bolt or a head or anything. Will be putting them back, of course. These cars rock the B pillar lights well!

Also is there any specific adhesive I should use when re-gluing the insulation above the headliner? There were some spots where it was starting to sag before I dropped the headliner, and I had to peel some of the stuff back to get to the tiara bar trim screws. Since I'm there already figure it'd be a good time to re-glue the black rubber seals that go on the inside of the B pillars behind the coach lamp assembly. Driver side was loose and floppy, pass side less so.

Thanks in advance mangs!

[Tiggie]

Haven’t used it but sounds like this will fit the bill for the glue: https://www.3m.com/3M/en_US/company-...2639006&rt=rud

[Hearsesrock427]

Update. Was able to remove the coach lamps, turns out there's two little square pieces (use a small flat blade screw driver and gently work them out) that cover the screws. Got the rest of the vinyl top peeled off. Will replace coach lamp lights with clear lights tomorrow (assuming we can just bring the bulbs to a store and they'll supply us with stuff?), then get some of that adhesive for the headliner, then some specialized adhesive for the rubber seals/weatherstripping. Gotta do it all and do it right!

Thanks to this thread for explaining things!

http://www.grandmarq.net/vb/showthread.php?45533-Opera-lights

[gadget73]

should just be a 194 lamp, those are clear.