Originally posted by thewishkah
View Post
 |
-
Yes, I've seen this done. You have to extend some wires, but it does work.2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIP -
Any idea how hard it would be? or what wires would need to be lengthened ? I might want to do that rather than cut up the dash some.Comment
-
Unfortunately the pics don't work. Sounds like you don't even need to lengthen anything.Originally posted by thewishkah View Post
2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIPComment
-
In my 09, I still had to do some trimming. Unfortunately, the roto-zip got away from me and trashed my dash trim a bit :nonono:
It sure sounds great, though!1983 Grand Marquis 2Dr Sedan "Mercules"
Tremec TKO conversion, hydraulic clutch, HURST equipped!
Comment
-
That write up doesnt exactly fit what I was looking for. I was looking to put the hvac in the slot where the radio used to be. I would use one of those things with the little pocket above or below so that the rest of the hole would be filled in. I just don't want to break anything lol. I also do not want to remove the whole dash to run wires.Comment
-
Well I just had to trim the dash a bit, but it came out nice. I just have a little cosmetics to finish up and it will look great. It now opens and closes nicely. I also bypassed the parking brake light switch.Comment
Comment