Police pod install on ATC equipped vehicle.

[87gtVIC]

here is a couple of pictures of the progress thus far. dont make fun of my pink screw gun

[gadget73]

private photo album mang. Please make sure you don't have any wang pics mixed in when you make it public, we don't need to see that shit.

[87gtVIC]

oops sry..I fixed it.... and by pink screw gun i did not mean my wang lol

[trwp72]

Good progress so far....

[p71towny]

Kewl!

[87gtVIC]

I hope the whole is big enough

[visionmercury]

thats comimg along nicely cant wait to see the finished product

[86VickyLX]

I told you you could move it, now see if the system still funtions properly.

[87gtVIC]

I told you you could move it, now see if the system still funtions properly.

so far with no trim reinstalled everything works just fine. Too much rain today to do anything. I wanted to run all of the gauge wiring today, but i dont exactly fit that well in the car with door closed trying to wire stuff under the dash. Just not gonna happen.

[87gtVIC]

Yesterday was a complete washout...so all i got done after my day was this....Muhahahahahah!!!!!!!!!







I may cut the rest tonight. I have ugly calluses now because i used a razor blade to cut the material thus far on the trim panel.

And today after school and homework was complete I removed the dual gauge pod a pillar i have and routed a headlight triggered power wire, and good ground and the amp gauge wires to the massive gaping whole on the passengers side dash. Some time during this week (i hope) i will route the air/fuel gauge wires and purchase a vacuum gauge.

Take a look at my collection now.





A double gauge pod pillar, a single gauge pod pillar and a naked pillar that will go on the car next. It has come to my attention that i like to change thins around often.

[85crownHPP]

nice pics mang!!


I didn't realize that thing had such direct control of the blend door!! I had always thought it was just a sensor, not a vacuum control as well.
I guess the other end of that cable is attached to the temperature lever on the HVAC control?

[87gtVIC]

nice pics mang!!


I didn't realize that thing had such direct control of the blend door!! I had always thought it was just a sensor, not a vacuum control as well.
I guess the other end of that cable is attached to the temperature lever on the HVAC control?

Yes that damn freakin frackin cable is indeed attached to the temperature lever on the HVAC control. Feakin ATC equipped vehicles. FFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUU.

Oh and thanks, hopefull this will allow future panther owners to embark on the task of equipping a ATC equipped vehicle with police gauges. Or i just wasted my time lol. I enjoy it.

[85crownHPP]

wheres that black air tubing go?? I assumed it sniffed out the hole in the dash...?

[87gtVIC]

Ya mean this?



It goes through the firewall, to god now where? and the other end iss stuffed onto that damn sensor that i dislike so much

[85crownHPP]

ah... maybe that's an outside air sampler it uses as well...