Announcement

Collapse
No announcement yet.

31 SPLINE AXLES I'm looking for some advise on where to obtain axles and a shims

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    31 SPLINE AXLES I'm looking for some advise on where to obtain axles and a shims

    Hello everyone, I'm looking for some advise on where to obtain axles and a shim assortment
    Am installing a traction-lok differential (Ford Racing M-4204-F318c) in my 2002 LS and am looking for a reasonably cost source for 31 spline axles with anti-lock sensors and wheel studs.
    Also a shim assortment for setting lash.
    I am in the Denver Colorado area. Any suggestions will be appreciated. Thank you, Uncle Frank

    #2
    2002 28 spline axles i believe are 32" & change long. 2003 and up are 34" & change long both 28 & 31 spline. I got the dimensions from RockAuto.com.
    I can't remember if the axle housing themselves are a direct swap. So it might be cheaper and easier to swap in a new housing if the mounts are the same 2002 vs. 2003. I know i should remember but i don't.

    Failing that you can have axles made new. There was a thread on here recently about that. It was not crazy expensive iirc.
    03 Marauder DPB, HS, 6disk, Organizer Mods> LED's in & Out, M&Z rear control arms, Oil deflector, U-Haul Trans Pan, Blue Fuzzy Dice
    02 SL500 Silver Arrow
    08 TC Signature Limited, HID's Mods>06 Mustang Bullet Rims 235/55-17 Z rated BFG G-Force Comp-2 A/S Plus, Addco 1" rear Sway, Posi Carrier, Compustar Remote Start, floor liners, trunk organizer, Two part Sun Visors, B&M Trans drain Plug, Winter=05 Mustang GT rims, Nokian Hakkapeliitta R-2 235/55-17
    12 Escape Limited V6 AWD, 225/65R17 Vredestein Quatrac Pro, Winter 235/70-16 Conti Viking Contact7 Mods>Beamtech LED headlight bulbs, Husky floor liners

    Comment


      #3
      Originally posted by jaywish View Post
      I can't remember if the axle housing themselves are a direct swap.
      It is not a direct swap.
      Originally posted by jaywish View Post
      Failing that you can have axles made new. There was a thread on here recently about that. It was not crazy expensive iirc.
      Something like Moser is not too bad, but adding ABS to those ups the price.
      Stock limo axles are the other option



      LOUD EXHAUST IS FUN! AM I SHOUTING?
      1989 Country Squire - Twilight Blue, 347 stroker


      2005 Crown Victoria Sport - Black - Stainless Works full exhaust with Borla Pro XS mufflers, BBK 75mm TB, Accufab plenum, CVPI airbox, Heinous control arms, etc...

      Comment


        #4
        I was reminded that the limo axles used truck axles and are therefore thicker and will not fit. Since he has an 02 with the watts link, swapping in the axle housing won't work either. I'd go with the Moser custom axles.

        Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
        rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)

        Originally posted by gadget73
        ... and it should all work like magic and unicorns and stuff.

        Originally posted by dmccaig
        Overhead, some poor bastards are flying in airplanes.

        Comment

        Working...
        X