Announcement

Collapse
No announcement yet.

My 1987 Mercury Colony Park

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Still haven't looked at the cluster. Need to, but it seems if the car is driven regularly, the issue doesn't occur. Doesn't make a heck of a lot of sense. Seems the illumination/backfeed wackiness only happens after it sits for several days and clears up after the car is driven a bit.


    Only thing I've done is swap LEDs into the rest of the back of the car. Swapped the tag lights for warm white LEDs several months prior.




    Used the "fancy" built-in resistor type LEDs on the tail/brake/turn bulbs so I could keep the original style 323 flasher working along with the speed control. No problems with that. Even with the built in resistors, it seems some draw must be reduced, as the dash illumination doesn't flicker a touch the way it used to with the original bulbs when I'd hit the brakes. I also used "standard" LED for the reverse light since the originals were considerably dull. Overall I'm pleased with the additional brightness from all the bulbs.


    My Cars:
    -1964 Comet 202 (116K Miles) - Long Term Project
    -1979 Ford LTD Landau (38K Miles) - New Cruiser

    -1986 Dodge D-150 Royale SE (112K Miles) - Slowly Getting Put Back Together
    -1987 Grand Marquis Colony Park LS (343K Miles) - April 2017 + September 2019 POTM Winner
    -1997 Grand Marquis LS (244K Miles) - March 2015 + January 2019 POTM Winner - Sold (05/2011 - 07/2024)

    Comment


      I did LED reverse lights in the Cont trying to get some more out of it when the reverse light switch was jacked and dropping a bunch of voltage. It helped but even now with a good switch thats not losing 3 volts they aren't very bright. I should pull those and see if the reflective coating in the housing even still exists.
      86 Lincoln Town Car (Galactica).
      5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

      91 Lincoln Mark VII LSC grandpa spec white and cranberry

      1984 Lincoln Continental TurboDiesel - rolls coal

      Originally posted by phayzer5
      I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

      Comment


        Yeah... LED reverse lights on my 93 don't do well (but those are small to begin with) and the LEDs on the Expedition are like rear headlights. Nice and bright. basically 921/912 vs 3156. 3156 has much more headroom to work with.

        Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
        rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)

        Originally posted by gadget73
        ... and it should all work like magic and unicorns and stuff.

        Originally posted by dmccaig
        Overhead, some poor bastards are flying in airplanes.

        Comment


          That looks really good.
          ~David~

          My 1987 Crown Victoria Coupe: The Brown Blob
          My 2004 Mercedes Benz E320:The Benz

          Originally posted by ootdega
          My life is a long series of "nevermind" and "I guess not."

          Originally posted by DerekTheGreat
          But, that's just coming from me, this site's biggest pessimist. Best of luck

          Originally posted by gadget73
          my car starts and it has AC. Yours doesn't start and it has no AC. Seems obvious to me.




          Comment


            not sure what they are on the Conti, its whatever bulb has the same base as an 1156, but the glass part is like half the size of an 1156. It got 1156 replacement LED though since they fit. Just cheap crap tho which is likely not helping.
            86 Lincoln Town Car (Galactica).
            5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

            91 Lincoln Mark VII LSC grandpa spec white and cranberry

            1984 Lincoln Continental TurboDiesel - rolls coal

            Originally posted by phayzer5
            I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

            Comment


              Got a little trip coming up soon. Figured I'd address a few things that really have needed done for a while, and some new stuff that's gonna get done tomorrow.

              Had originally noticed a slight pulsation when braking, but it was more of an on/off catch feeling, less of the warped rotor sensation. Found the RR drum was kinda damp inside.





              Yay, leaky wheel cylinder. Dunno how old it is and how many miles are on it, but its getting replaced regardless. Going to go ahead and do both sides and install new brake shoes as well since these have been exposed for who knows how long at this point. I'll also take care lubricating the backing plate points and cleaning/lubing the self adjuster once I get it pulled apart. I'll bleed the whole system with some of the Bosch ESI 6 fluid I have that's supposed to cover DOT 3, 4, and 5.1.


              Took my drums up to O'Reilly and cut 'em. I've had a long standing agreement with the current manager to be able to still use the lathe after left about three years ago. Today not a single person I recognized was in there and the assistant manager was out, so there was a substitute from another store who had to actually verify if I could use the machine after he told me "they don't cut drums/rotors anymore." Honestly a bit shocked knowing that now and the fact that the lathe otherwise is used for storage. That was one of my more "enjoyable" things to do then and honestly worked out pretty good for customers on certain rotors cost wise.




              After all that fun, I did reinstall the drums and wheels just so the car wasn't on stands the rest of the day. Addressed a handful of inoperative lock actuators. Passenger RF and LR just managed to get the electrical connector loose. Reconnected, works good again. Addressed the tailgate one with a good used one from a '89 since that one legitimately went missing some time ago with no explanation. Found the fold down safety latch arm had also detached and fallen into the tailgate.



              This arm is depressed by the window when its rolled down which then releases the safety latch so you can flip the tailgate down instead of opening it as door if you prefer. The plastic clip on the arm had given up. I'd also had the clip on the lock cylinder rod break and prevent me from operating the lock/window system as well. Luckily, the Dorman 75450​ pack of door rod clips had all the needed bits so I was able to fix the lock cylinder and the window safety rod.



              In case anyone has to deal with that rod falling out, there's a hole to the right of the fixed rod it inserts into. The rod goes behind the window regulator assembly and otherwise kinda dangles in free space once its fitted.



              Tomorrow is brake repairs, and Wednesday I'll do a interior/exterior cleaning and final check. Should be all good to go for the weekend.


              My Cars:
              -1964 Comet 202 (116K Miles) - Long Term Project
              -1979 Ford LTD Landau (38K Miles) - New Cruiser

              -1986 Dodge D-150 Royale SE (112K Miles) - Slowly Getting Put Back Together
              -1987 Grand Marquis Colony Park LS (343K Miles) - April 2017 + September 2019 POTM Winner
              -1997 Grand Marquis LS (244K Miles) - March 2015 + January 2019 POTM Winner - Sold (05/2011 - 07/2024)

              Comment


                finding places to turn rotors and drums is like pulling teeth. Before the machine shop at the Napa closed down they told me it was going to be a month before they could get to it. GTFO. Shame my lathe won't swing over a 10" diameter, I'd just do it myself. Its not a brake lathe but on some level a lathe is a lathe. I really don't want to buy a brake lathe for the rare occasions I need one. besides the space it would consume, I would end up becoming "the brake rotor guy" in the area and I really have no interest in that.
                86 Lincoln Town Car (Galactica).
                5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

                91 Lincoln Mark VII LSC grandpa spec white and cranberry

                1984 Lincoln Continental TurboDiesel - rolls coal

                Originally posted by phayzer5
                I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

                Comment


                  Originally posted by gadget73 View Post
                  finding places to turn rotors and drums is like pulling teeth. Before the machine shop at the Napa closed down they told me it was going to be a month before they could get to it. GTFO. Shame my lathe won't swing over a 10" diameter, I'd just do it myself. Its not a brake lathe but on some level a lathe is a lathe. I really don't want to buy a brake lathe for the rare occasions I need one. besides the space it would consume, I would end up becoming "the brake rotor guy" in the area and I really have no interest in that.
                  Wow, a month? Yeah, miss me with that one. I'm in a similar place where it just doesn't make sense having a brake lathe for such infrequent use. It's a cool idea, but totally impractical. Plus, I'd hate to consider having to buy replacement bits. I don't recall them being particularly cheap, or at least they weren't at the store.

                  Perhaps I should order a set of 11" drums and machine them, put some protective coating on them and throw them in a corner instead for the future, should I ever manage to actually wear the existing Ford stamped ones out. I've seen a lot of new cast drums that were probably more akin to a oval than a circle. Had a shop that used to insist we'd cut them before sending them out, and I saw absolutely why once it started to cut.


                  Anyway, the car!



                  Tossed together my discount brake job on both sides. Had a box of closeout RockAuto shoes I'd ordered forever ago, an ancient Parts Master branded set that was probably the most cohesive marriage of NAFTA era production: mounting plates made in Canada, friction linings from the USA, and all riveted together in Mexico. New wheel cylinders from O'Reilly (best Chinese specials) and recycled brake hardware.

                  Set the star wheel adjusters, fitted the drums, and nothing would bleed. Like, a little fluid came out of the RR cylinder and then nothing. Couldn't get anything out of the LR cylinder. I've bled brakes on various cars of various years, so I was a bit surprised that I had a very firm pedal and virtually no travel. Finally opted to try it with the car running, and then it was game on as I had full pedal stroke again. Purged all the air and bled all the corners with some Bosch ESI6 fluid I've had on hand, which is supposed to cover and exceed DOT 3, 4, and 5.1 applications.

                  Got the car into the street and did a few reverse stops to get the self adjusters set and the pedal leveled out real nice. Brakes feel much more confident now with fresh fluid and no leaks.


                  Tomorrow will be a wash and interior cleaning. Should be good to go for the weekend.
                  Last edited by Kodachrome Wolf; 05-07-2024, 09:01 PM.


                  My Cars:
                  -1964 Comet 202 (116K Miles) - Long Term Project
                  -1979 Ford LTD Landau (38K Miles) - New Cruiser

                  -1986 Dodge D-150 Royale SE (112K Miles) - Slowly Getting Put Back Together
                  -1987 Grand Marquis Colony Park LS (343K Miles) - April 2017 + September 2019 POTM Winner
                  -1997 Grand Marquis LS (244K Miles) - March 2015 + January 2019 POTM Winner - Sold (05/2011 - 07/2024)

                  Comment


                    Originally posted by gadget73 View Post
                    finding places to turn rotors and drums is like pulling teeth. Before the machine shop at the Napa closed down they told me it was going to be a month before they could get to it. GTFO. Shame my lathe won't swing over a 10" diameter, I'd just do it myself. Its not a brake lathe but on some level a lathe is a lathe. I really don't want to buy a brake lathe for the rare occasions I need one. besides the space it would consume, I would end up becoming "the brake rotor guy" in the area and I really have no interest in that.
                    This. It's why the drums on my truck have ruts from the shoes. I'm not making an appointment with the only shop that still turns the things. Well, I did once. Naturally, the guy was out sick that day.
                    1985 LTD Crown Victoria - SOLD
                    1988 Town Car Signature - Current Party Barge

                    Comment


                      So I know I've mentioned somewhere around here I've had issues with the aftermarket speedometer cable I got. Binding issue causing the speedometer to lock up and other strange behavior. Anyway, I got a bit frustrated after it locked up again recently and decided to revisit that problem with a junkyard speedometer cable from a '89 LTD CV.

                      I had a bear of a time getting the cable core to come out of the replacement VSS I installed (a Standard Ignition brand one) prior with the new cable. Then it dawned on me there was a mark on that replacement cable that showed it barely was engaging the cable and forcing the extra distance up into the speedometer head. The OE cable wouldn't fit at all. Apparently the aftermarket VSS square hole for the cable end to go into was too small! I'm a little shocked I got it installed in the first place, but the extra cable length getting jammed up against the head would explain it since it should seat well into that hole with some movement room.

                      I grabbed a VSS out of a '89 Town Car, replaced the seals from the newer VSS and tossed that into the car. Huh, it all fit properly with no issue. I've likely misplaced some of my frustration with the cable, when I should have been looking at the sensor. Food for thought if anyone needs one, probably best if you can catch a Motorcraft unit or good condition used one.


                      My Cars:
                      -1964 Comet 202 (116K Miles) - Long Term Project
                      -1979 Ford LTD Landau (38K Miles) - New Cruiser

                      -1986 Dodge D-150 Royale SE (112K Miles) - Slowly Getting Put Back Together
                      -1987 Grand Marquis Colony Park LS (343K Miles) - April 2017 + September 2019 POTM Winner
                      -1997 Grand Marquis LS (244K Miles) - March 2015 + January 2019 POTM Winner - Sold (05/2011 - 07/2024)

                      Comment


                        Aftermarket parts are really ticking me off lately! Sounds like I am not the only one.
                        1990 Country Squire - under restoration
                        1988 Crown Vic LTD Wagon - daily beater

                        GMN Box Panther History
                        Box Panther Horsepower and Torque Ratings
                        Box Panther Production Numbers

                        Comment


                          nah its an epidemic of trash. I've increasingly been NOS parts shopping and hoarding because at least I feel those parts have a reasonable chance of working even if they are 40 years old and dusty.
                          86 Lincoln Town Car (Galactica).
                          5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

                          91 Lincoln Mark VII LSC grandpa spec white and cranberry

                          1984 Lincoln Continental TurboDiesel - rolls coal

                          Originally posted by phayzer5
                          I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

                          Comment

                          Working...
                          X