I added a ground wire where the bracket attaches to the case on that nut. I'll probably need to clean that surface real good since it looks meh.
I used your wiring setup:
on the power connector
yellow/black - ignition +
gn/y - batt +
o/bl dot - premium sound amp (hot when radio is on)
bl/r - dash lights
Only wires I have hooked up are the yellow/black, green/yellow, and blue/red ones. I left out the orange wire if its a hot wire with radio switched on. Only thing I could consider is maybe I mis-read the adapter plug wires and switched around the 12v constant and switched, but I figure the radio should still turn on with the key on at least. Like I said prior, only the light turns on with the dash lights.
And regarding the extra plugs, they're all radio. They have the same P/N on the cases. The door dinger is plugged in and doing its thing, so it wouldn't be an extra here.
I used your wiring setup:
on the power connector
yellow/black - ignition +
gn/y - batt +
o/bl dot - premium sound amp (hot when radio is on)
bl/r - dash lights
Only wires I have hooked up are the yellow/black, green/yellow, and blue/red ones. I left out the orange wire if its a hot wire with radio switched on. Only thing I could consider is maybe I mis-read the adapter plug wires and switched around the 12v constant and switched, but I figure the radio should still turn on with the key on at least. Like I said prior, only the light turns on with the dash lights.
And regarding the extra plugs, they're all radio. They have the same P/N on the cases. The door dinger is plugged in and doing its thing, so it wouldn't be an extra here.
Comment