If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Please let us know if things are working or not. This is still somewhat a work in progress so don't be too surprised if things magically appear from one visit to the next.
Nice. Bummer on the valve cover deal. Stamped Cobra covers are nearly identical to stockers on these cars right? If so...no hope for my cut out baffle Mustang cast aluminum covers then eh? Looks like I will be a happy camper once I get my engine build started.
Nice. Bummer on the valve cover deal. Stamped Cobra covers are nearly identical to stockers on these cars right? If so...no hope for my cut out baffle Mustang cast aluminum covers then eh? Looks like I will be a happy camper once I get my engine build started.
The Cobra valve covers are the exact same as the factory stamped steel covers. The cast aluminum HO ones should fit fine (I know I mocked them up once) as they are taller then the steel ones.
I always heard they have less clearance. W/E. I do remember you mocking them up for me though and saying they may clear. I will play it by hear....literally.
2020 Volvo XC90 T6 Momentum (Ice White / Blonde)
2022 Ram 1500 4x4 5.7 Etorque, Built to Serve Edition, (Granite Crystal / Black) Past Panthers
1989 Grand Marquis LS (Cabernet/Grey), 1989 Lincoln Town Car SS (White/Blue), 2004 Mercury Grand Marquis Ultimate (White/Black)
Originally posted by Lincolnmania
if its got tits or tires it's bound to give you trouble
Best part of blowing something up is teardown! Terminally dick'd would be the proper term for my rear end.
I've had a Trick Flow girdle laying around for months, I was waiting till I put 4.10's in to install it. Guess I will still be waiting
I was beating on the car all night working on my tune, I had just finished and was leaving my house and simply rolled into it, didn't even dump the clutch or anything, soon as it hit the power band in first, started spinning, then BOOM. Oh well, just another thing to upgrade. I was wanting to go to an aero rear end anyways.
But yes, blew the caps right off, broke one of the bolts, bent the other 3, destroyed the ring and pinion, broke a spacer, ect...
Comment