Vicky is back and better then ever! Though she has gotten a little grayer. Phil took some pictures today and they turned out pretty good. I got the proper fan clutch and it was listed as a police clutch. It was smaller than the Standard one, go figure. Everything is working as it should. And I am very pleased. I need to move the soup can and coil down because they're not letting the hood come down in the middle on the sides. Pics will be posted later.
 |
-
-
Vicky's getting new front brakes and outer tie rod ends. Gonna do them monday, got all new front brake stuff. Rotors, pads, calipers, seals, and hoses. Then I'll do the tie rod ends and have her aligned. Tomorrow I'm going to the junkyard to harvest a new computer harness and computer for Vicky, in attempts to stop the computer malfunctions. I'm also gonna get some trim panels, and possibly a good rear bumper since her's is rotting out.
I would also like to find an HO intake for Vicky, HO upper intake, throttle body with '86 vic linkage, and a bored out EGR spacer. So if anyone can help me out with this, please let me know.Comment
-
Originally posted by 86VickyLX View Post
Oh shiz!!!! How the heck did I miss this??? Awesome mang
!!!
PackmanComment
-
got everything but lopo spacers mang......david got my last one, cant take one from a running motor......get me a spacer and i'll get one boredOriginally posted by 86VickyLX View Post
1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
2006 Lincoln Town Car Signature. Stock for now
1989 Ford F-250 4x4 much much more to come, sefi converted so far.
1986 Toyota pickup with LSC wheels and 225/60/16 tires.
2008 Hyundai Elantra future Revcon toad
1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)
please be patient, rebuilding an empire!
Comment
-
Awesome! I got one! How much for the whole kit'n'kabootle?Originally posted by Lincolnmania View PostComment
-
Heres some long awaited pix of vicky, shes SEXY
The cut out fender to put in the luxury lights:
Attached Files-Phil
sigpic
+1982 Ford LTD-S Police Car. Built 351w, Trickflow 11R 190 Heads, Holley Sniper EFI, RPM Intake+ Hyperspark dizzy, WR-AOD, Full exhaust headers to tails. 3.27 Trac-Lok Rear. Aluminum Police Driveshaft. Speedway Springs+Bilstein Shocks, Intermediate Brakes, HPP Steering Box.
+2003 Acura CL Type S 6-speedComment
-
-
Thanks Phil! *Cough* FINALLY *COUGH* These pics were taken 5/11/09, Vicky has the front hubcaps back on her now.Comment
-
Damn!!!! It almost looks as if nothing ever happened.
PackmanComment
-
What are you pointing at?~David~
My 1987 Crown Victoria Coupe: The Brown Blob
My 2004 Mercedes Benz E320:The Benz
Originally posted by ootdega
My life is a long series of "nevermind" and "I guess not."
Originally posted by DerekTheGreat
But, that's just coming from me, this site's biggest pessimist. Best of luck
Originally posted by gadget73
my car starts and it has AC. Yours doesn't start and it has no AC. Seems obvious to me.
Comment
-
Either the wire for the alternator, or the emissions stuff that I put on differently than stock. I couldn't remember how the damn things went.Comment
-
He's pointing at the Honda he just ran over.
PackmanComment
-
Yeah right.Comment
-
I have some 3M adhesive remover and a putty knife if that pesky Honda won't come off of your tires.
PackmanComment
-
Comment
-
I used your tip for lining up the panels. Drilling holes with guide pins. It worked out great!Comment
Comment