Dear Panthers,
Any recommendations for sound deadening?
Donald
Any recommendations for sound deadening?
Donald
 |
-
-
For cabin noise from the engine?
Firewall in the cabin, under the carpet, that aluminum backed butyl rubber stuff works pretty damn good. Find stuff that's at least 1/8 thick or thicker. If you can find 1/4 inch thick stuff, that would work excellent. It's kinda spendy that thick though. Might be cheaper to double/triple layer the thinner stuff.
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes. -
Brand options that are known good:
Dynamat
Cascade Audio VMAX (not as thick as some of the Dynamat options, but works well)
FATMAT
BOOM MAT
Thicker is better for noise reduction, but obviously too thick will cause fitment issues with the interior. Working the material as high up the firewall as possible and down under the front seats at least with at least 2 layers over the trans tunnel and firewall to really cut down the noise.
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes.Comment
-
Also there is paint on bed liner with optional sound deadening. I used both bed liner and "that 1/8" stuff" Sly mentioned in the the 89 wagon. It worked well. No fitment issues03 Marauder DPB, HS, 6disk, Organizer Mods> LED's in & Out, M&Z rear control arms, Oil deflector, U-Haul Trans Pan, Blue Fuzzy Dice
02 SL500 Silver Arrow
08 TC Signature Limited, HID's Mods>06 Mustang Bullet Rims 235/55-17 Z rated BFG G-Force Comp-2 A/S Plus, Addco 1" rear Sway, Posi Carrier, Compustar Remote Start, floor liners, trunk organizer, Two part Sun Visors, B&M Trans drain Plug, Winter=05 Mustang GT rims, Nokian Hakkapeliitta R-2 235/55-17
12 Escape Limited V6 AWD, 225/65R17 Vredestein Quatrac Pro, Winter 235/70-16 Conti Viking Contact7 Mods>Beamtech LED headlight bulbs, Husky floor linersComment
-
I still have some left but hope it is enough for the next wagon.03 Marauder DPB, HS, 6disk, Organizer Mods> LED's in & Out, M&Z rear control arms, Oil deflector, U-Haul Trans Pan, Blue Fuzzy Dice
02 SL500 Silver Arrow
08 TC Signature Limited, HID's Mods>06 Mustang Bullet Rims 235/55-17 Z rated BFG G-Force Comp-2 A/S Plus, Addco 1" rear Sway, Posi Carrier, Compustar Remote Start, floor liners, trunk organizer, Two part Sun Visors, B&M Trans drain Plug, Winter=05 Mustang GT rims, Nokian Hakkapeliitta R-2 235/55-17
12 Escape Limited V6 AWD, 225/65R17 Vredestein Quatrac Pro, Winter 235/70-16 Conti Viking Contact7 Mods>Beamtech LED headlight bulbs, Husky floor linersComment
-
This is what you want for underhood. Not sure if it's big enough for our absurdly large hoods though.
85 4 door 351 Civi Crown Victoria - Summer daily driver, sleeper in the making, and wildly inappropriate autocross machine
160KMs 600cfm holley, shorty headers, 2.5" catted exhaust, 255/295 tires, cop shocks, cop swaybars, underdrive pulley, 2.73L gears.
waiting for install: 3.27's, Poly bushings, boxed rear arms, 2500 stall converter, ported e7's, etc
06 Mazda 3 hatch 2.3L 5AT (winter beater that cost more than my summer car)Comment
-
This is what you want for underhood. Not sure if it's big enough for our absurdly large hoods though.
85 4 door 351 Civi Crown Victoria - Summer daily driver, sleeper in the making, and wildly inappropriate autocross machine
160KMs 600cfm holley, shorty headers, 2.5" catted exhaust, 255/295 tires, cop shocks, cop swaybars, underdrive pulley, 2.73L gears.
waiting for install: 3.27's, Poly bushings, boxed rear arms, 2500 stall converter, ported e7's, etc
06 Mazda 3 hatch 2.3L 5AT (winter beater that cost more than my summer car)Comment
Comment