If anyone is interested I have a pattern that I used to make my subwoofer boxes for my 90 vic. I can post a few pics of the boxes and of the pattern. let me know if anyone could use this.
 |
-
What happened here? -
Definitly post them..! We need all the ideas we can get.
Which way do the woofers face from the side cubbies?Pete ::::>>> resident LED addict and CFI defector LED bulb replacements
'LTD HPP' 85 Vic (my rusty baby) '06 Honda Reflex 250cc 'Baileys' 91 Vic (faded cream puff) ClifFord 'ODB' 88 P72 (SOLD) '77 LTDII (RIP)
sigpic
85HPP's most noteworthy mods: CFI to SEFI conversion w/HO upperstuff headers & flowmasters P71 airbox Towncar seats LED dash light-show center console w/5 gauge package LED 3rd brake light 3G alternator mini starter washer/coolant bottle upgrade Towncar power trunk pull underhood fuse/relay box 16" HPP wheels - police swaybars w/poly rubbers - budget Alpine driven 10 speaker stereo -
if only Lincoln trunk sides were the same.... Also would be really nice if mine were symmetrical, that air compressor sort of messes the gig up.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousersComment
-
the woofers fire into the trunk in a push - pull configuration. take a look at the pic to get an idea of my setup. it wont be as loud as two subs firing in the same direction facing the back seat, but it clears up the whole trunk area. plus, with my two boston g5's and some decent power (1200 watts rms to each sub) i can pull 124+ db in the drivers seat. so they have the potential to thump. I will be posting the pics of the template in a week or so when i go back home. btw, the template is for 3/4 mdf pannels and only covers the two faces, but its not hard to make the other pannels.What happened here?Comment
-
here is a pic of my trunk. the car is a 1990 crown victoria LXAttached FilesWhat happened here?Comment
-
-
as promised, here are a few more pics of these boxes. I will be posting a few pics of the template over the weekend for everyone.Attached FilesWhat happened here?Comment
-
-
more pics. let me know if you need or want more pics of certain things or detailed pics.Attached FilesWhat happened here?Comment
-
-
i did the same thing with my 97.
the boxes are about 1.25 cubic feet, plus the displacement of the subs.
http://secondhandracing.com/Home.aspx
http://secondhandradio.com/
R.I.P. Jason P Harrill 6-12-06
http://www.grandmarq.net/vb/showthread.php?t=5634Comment
-
very nice! got any dimensions on that box or a pattern? I ran out of time to get my pattern photographed and uploaded.What happened here?Comment
-
no i dont, pretty much just used cardboard to get the shape and went off that.http://secondhandracing.com/Home.aspx
http://secondhandradio.com/
R.I.P. Jason P Harrill 6-12-06
http://www.grandmarq.net/vb/showthread.php?t=5634Comment
Comment