How do I get to the motor mounting bolts. I need to remove and replace it on my 85 2 door.
Thanks
Tim
Thanks
Tim
 |
-
2000 Ford Crown Victoria
84 Lincoln Town car signature, R.I.P
85 Ford LTD Crown Victoria 2 door performance project
89 Lincoln town car: RIP
89 Crown Victoria LX 2002 USACi sound quality world champion RIP
1990 Mercury Grand Marquis LS
1994 Mercury Grand Marquis (sold)
2004 Mercury Marauder. owned for a week then got screwed by the dealer -
There should be 3 dimples in the door near the motor drill them out about 1/2" bit & you can get a socket on extension on the bolts.Originally posted by over2tonsofFun View Post -
If the window motor/gear has never been replaced, there will be factory divots that need to be drilled out so you can access the motor mounting bolts behind them. Then you can remove the bolts, remove the motor and replace it or the window gear as required.What I Own: 1993 Mercury Grand Marquis GS
What I Help Maintain: 1996 CV / 1988 CV / 1988 TempoComment
-
I found two of the dimples but hell if I can find the third.
2000 Ford Crown Victoria
84 Lincoln Town car signature, R.I.P
85 Ford LTD Crown Victoria 2 door performance project
89 Lincoln town car: RIP
89 Crown Victoria LX 2002 USACi sound quality world champion RIP
1990 Mercury Grand Marquis LS
1994 Mercury Grand Marquis (sold)
2004 Mercury Marauder. owned for a week then got screwed by the dealerComment
-
Can you fully see the motor through a hole in the door? If so, you can see the other two bolts and just look for a third. There are two on the bottom (I think - haven't looked in a long time) and one on the top in a triangular pattern. Let us know if this helps!What I Own: 1993 Mercury Grand Marquis GS
What I Help Maintain: 1996 CV / 1988 CV / 1988 TempoComment
-
I see the third in your photo. It is between your two fingers below the hump. It hangs out just below what the door panel covers.~David~
My 1987 Crown Victoria Coupe: The Brown Blob
My 2004 Mercedes Benz E320:The Benz
Originally posted by ootdega
My life is a long series of "nevermind" and "I guess not."
Originally posted by DerekTheGreat
But, that's just coming from me, this site's biggest pessimist. Best of luck
Originally posted by gadget73
my car starts and it has AC. Yours doesn't start and it has no AC. Seems obvious to me.
Comment
-
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes.Comment
-
Sly, That seems like it is a spot weld. There is nothing behind it but the outer door skin.
Tim2000 Ford Crown Victoria
84 Lincoln Town car signature, R.I.P
85 Ford LTD Crown Victoria 2 door performance project
89 Lincoln town car: RIP
89 Crown Victoria LX 2002 USACi sound quality world champion RIP
1990 Mercury Grand Marquis LS
1994 Mercury Grand Marquis (sold)
2004 Mercury Marauder. owned for a week then got screwed by the dealerComment
-
I would simply do what I already mentioned and see where the bolts are. Then you can figure where the divot is.What I Own: 1993 Mercury Grand Marquis GS
What I Help Maintain: 1996 CV / 1988 CV / 1988 TempoComment
-
I agree with Frankie, might be work seeing if you can feel in there where the third bolt hole should be.
My car is a four door, so it might not be 100% the same, but here's how mine looks. Thankfully (or not thankfully) my door panels are fubar so I was able to just lift it up to take these pics..
Hopefully these pics help even though it's not a 2 door.
'78 LTD | '87 Grand Marquis | '89 Crown Vic (RIP) | '91 Grand Marquis (RIP) | '94 Town Car (RIP) | '97 Town Car (RIP)Comment
Comment