Courtesy Light...88 Lincoln Towny

[Grand1]

I got this in an effort to fix my passenger side, left rear light that will not turn on from the
current switch in the bezel:





I have the same issue on my drivers side control.....the switch does not turn on dome light
I bought two of these....would this fix both issues?

Another tid bit....I have no experience in doing this...any tips with how to connect the wiring
would be appreciated.

[hypostang]

The switch is not supposed to turn on the dome light , only the reading lights in the "C" pillar and only when the ignition is in the "on " position

[Grand1]

Cool, thanks for the info....but since my current switch does not do this...would it work if I were to replace it with what
I bought?


......Im a newb....of course........... what is the "c" pillar?

[hypostang]

Cool, thanks for the info....but since my current switch does not do this...would it work if I were to replace it with what
I bought?


......Im a newb....of course........... what is the "c" pillar?

It may or may not be the problem , but it certainly would not hurt to try it. , it just plugs in when you take the bezel out of the door.

The "c" pillar is where the back part of your roof slopes down to meet the car , they are referred to, front to back as "a" at the windshield "b" just after the front door , and "c"

[Grand1]

thanks again....any tips on how to connect the new switches?

is it like "plug and play"?

[hypostang]

Yes , That switch you have pictured is plug and play