So on my '86 MGM there is a typical license plate light that is attached to the underside of the trunk lid. Well the small white plastic housing that the bulb snaps into has bit the dust after all these years. On the underside is the following: SAE L-79MY. Does anyone have this little POS? At present the entire bulb and wire is just hanging down in front of my license plate:-( Thanks in advance for any assistance, hopefully someone has this.............
Announcement
Collapse
No announcement yet.
Plastic light housing needed
Collapse
X
-
Does the Dorman 68152 seem correct? (mounting holes dead center of the sides?)
If the mounting holes are slightly offset, it may be using the same ones as the fox bodies and LMR has that one: https://lmr.com/item/LRS-13550A-K/79...-And-Screw-Kit
Can't find a picture of what those buggers look like, so I'm not sure if either of these will work.
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes.
Comment
-
Originally posted by sly View PostDoes the Dorman 68152 seem correct? (mounting holes dead center of the sides?)
If the mounting holes are slightly offset, it may be using the same ones as the fox bodies and LMR has that one: https://lmr.com/item/LRS-13550A-K/79...-And-Screw-Kit
Can't find a picture of what those buggers look like, so I'm not sure if either of these will work.
Comment
-
Found this but then there is the costs.....
1984-1992 Lincoln Mark VII Rear License Plate Light Unit, Ford OEM MERCURY Trunk. Condition is "Used". Tag light with trunk light removed from a 1984 Mercury Grand Marquis. Has wiring harness included along with rubber body grommet. Wiring runs from trunk lock to trunk hinge. Extremely rare to find unbroken with non-cut wires. Further cleaning may be required.What I Own: 1993 Mercury Grand Marquis GS
What I Help Maintain: 1996 CV / 1988 CV / 1988 Tempo
Comment
-
Originally posted by friskyfrankie View Post89 Colony Park
90 Colony Park
70 HEMI Daytona Convertible
Comment
-
Originally posted by WagonMan View PostEver think of asking your parts guy??? WagonMan
This is exactly what I need............see the two screw "wings"?...........on mine they completely disintegrated from age, I know I know, they should last forever!!
So ok Dude, do you still have my address, and yes I want it..............let me know how much and repeat your address up there in Ct, I seem to have lost it? I will send you the ship address via PM.........Last edited by Toploader; 11-09-2023, 02:32 PM.
Comment
-
Originally posted by friskyfrankie View Post
- Likes 1
Comment
-
oh wow... that is not what I was thinking. That's quite the rigging for a light.
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes.
- Likes 1
Comment
-
Originally posted by sly View Postoh wow... that is not what I was thinking. That's quite the rigging for a light.What I Own: 1993 Mercury Grand Marquis GS
What I Help Maintain: 1996 CV / 1988 CV / 1988 Tempo
Comment
Comment