Just picked up the ES poly bushings for the rear control arms
Was wondering what the poly spacers that are in the kit are used where ?
Was wondering what the poly spacers that are in the kit are used where ?
 |
-
-
Each bushing needs one spacer. There should be an instruction sheet with it that shows the diagram. The 2 thicker ones go on the diff ones. The rest go on all the rest. IIRC, they all go on the inside... but check the instructions. If yours is sans instructions... direct link to the ES site: http://imagesrv.catalograck.com/imgVD/ENE/17273.pdf
Only two things are infinite, the universe and human stupidity, and I'm not sure about the former. -- Albert Einstein
rides: 93 Crown Vic LX (The Red Velvet Cake), 2000 Crown Vic base model (Sandy), 2003 Expedition (the vacation beast)
Originally posted by gadget73
... and it should all work like magic and unicorns and stuff.
Originally posted by dmccaig
Overhead, some poor bastards are flying in airplanes. -
This gives you the idea. Kinda neat.
sigpic
89 LTC 429>557 Cobrajet stroker
13 F-150 XLT 6.2 l
"If I could separate what's real from what I've been dreaming I could live to fight another day"
Comment
-
Thanks
No instructions with mine, I bought them thru amazon but where way cheaper do to the box being beat up
And now I see the instructions were missing.
But all the parts where sealed in bags.
But for the $34 shipped I think I did goodComment
Comment