Major trans problem

[hav24wheel]

As some of u know, I picked up a 86 vic this weekend. Well I figured I would get it started up to see how it runs, because its been sitting for some 8-10 years. Well it turned over about half a turn than clicked. Put the car in neutral, and tryed again. It would move forward when I cranked the motor over. So what the hell could be wrong with the trans? I knew it was bad, but I thought it was burnt out so the car wouldn't move.

Needless to say I need to clean or replace the fuel pump before I can get the car to start. It fires off with some carb spray, but the fuel pump won't turn, so its prob all gummed up.

[79lincolnlover]

The gas has probably become "sludge" after 8-10 years!

[hav24wheel]

Ya I know that about the gas. Kinda expected that, but the trans moving the car when the shift lever is in neutral. That's what I'm wondering about. Mainly because I want to use the the valve body in my trans when I put a transgo AOD-HP kit in it. Transgo says that kit fits 84 and up AODs only.

[1980c10]

sprag clip or something like that IIRC, any who its does something and causes the clutchs to weld them selves together pretty much. creating a direct drive type thing. It happened to one of the old junk vics I had every gear was first gear even park. sorry for the vauge answer but im pretty sure its something like that. I could be way off someone correct me if I am please