Is there a big difference between a 2.73 and a 3.27? As in gas mileage and RPM.
 |
-
89 CV LX 225/60 x 16 tires, CC819 rear springs, Front & rear sway bar, trans & PS cooler from 90 cop car. KYB shocks, F-150 on rear. Dual Exhaust w/ H pipe. Dark brown door panels, carpet, steering wheel, trim parts from a 87 Mer GM. Power front buckets from 96 Jeep Cherokee. LED'S front & rear. 3G Alt from a 97 Taurus wagon 3.0. Electric fan. Rear axle from a 97 PI 3.27 with disk brakes. Headlight relays. -
Just as a gee whiz I used a newer model booster on my 84 and it bolted right up to my master and works fine.1984 CV tudor 351W, 4bbl, 5-speed best time in the 1/8 8.39 at 80 with 1.80 60ft time.
2006 P71, 1988 Bronco II, 1986 Baby LTD(5.0 & T5 swap in progress), 1976 16' Hobie Cat, 12' AquaFinn
http://www.cardomain.com/ride/2651997 UPDATED 20100826
sigpicComment
-
One note about the early Mark VII MC, the large and small fittings are reversed, so you'll either need adapters, or you'll need to cut the old flares off, swap the fittings, and re-flare it. I've halfass considered doing this on my car, but I've never been motivated enough to actually do it. Maybe when my original MC gives up.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousersComment
Comment