Wiper motor question. I’ve ran into a snag with wipers. I fabricated the 05 motor in and used the 05 wiring and switch. They work. However they do not rest low like the 84 but mainly the biggest issue is the multifunction switch from the 05 fits on the 84 steering column but is bulky and the column cover cannot go on. So the question I need help with is can anyone assist with how I could wire the 84 motor up as a stand alone. I still have the switch and the pig tail that goes to motor. I have the wiring book but I admit I struggle with schematics. It seams like it would be simple as there is only 3 wires built in to motor and 3 wire pig tail…
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
- Please let us know if things are working or not. This is still somewhat a work in progress so don't be too surprised if things magically appear from one visit to the next.