Announcement

Collapse
No announcement yet.

Redlin water wetter?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Redlin water wetter?

    What do you guys think about this product?

    The Best
    Past and Present Any Questions...................

    #2
    I use it religeously. If you live in a climate where it doesnt freeze, 2 bottles to the rest spring water, isd the best coolant you can get.

    However, I forget how much to use with coolant. It is good stuff!

    -GMGT
    Silvia!

    Comment


      #3
      It helped alittle when we put some in my old friends 95 vic. His had a overheating issue. It kind of helped. I think he needed a new t-stat on top of it but it worked pretty good.
      2000 Mustang GT "Blondie", 2000 CVPI "Sargent Crusty"

      Comment


        #4
        All i run in my 85 is tap water ( i know i should use distilled, maybe ill switch when i swap heads) and a bottle of Redline water wetter. My car stays under 200 degrees as long as i dont sit idling for more than a few minutes.
        http://secondhandracing.com/Home.aspx
        http://secondhandradio.com/

        R.I.P. Jason P Harrill 6-12-06

        http://www.grandmarq.net/vb/showthread.php?t=5634

        Comment


          #5
          Spring water is no better than tap water really. Distilled is the way to go


          *hides as he fills the radiator up from the garden hose*
          86 Lincoln Town Car (Galactica).
          5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

          91 Lincoln Mark VII LSC grandpa spec white and cranberry

          1984 Lincoln Continental TurboDiesel - rolls coal

          Originally posted by phayzer5
          I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

          Everything looks like voodoo if you don't understand how it works

          Comment


            #6
            if we were talking about batteries I would agree with the distilled water thing, however....


            I used to work in a plant with a large electroplating operation. We used tons of distiller/deionized water. It was bad about making the cpvc schedule80 pipes it ran through, very brittle. (cpvc will handle straight hydrocloric acid, pure clorine, etc. for decades with no problems) It seems that extremely pure water likes to disolve/absorb whatever minerals/chemicals it comes into contact with. I have seen cross sections of grey piping only a year or two old that was white and crumbly on the inside to a depth of a 1/4" or more.

            The long and short of it is, if it is distilled when you put it in, it won't be pure for very long as it will absorb minerals etc from the block,hoses,gaskets. It won't hurt anything, but I wouldn't waste my money unless the local water supply is really really bad. Even then a cheapo gallon of spring water should be just fine.


            Batteries on the other hand... well stick with distilled.
            Owner of the only known 5 speed box wagon with a lift kit.
            AKA, Herkimer the Hillbilly SUV.



            Axle codes
            Open/Lock/Ratio #
            -----------------------
            G / H / 2.26
            B / C / 2.47
            8 / M / 2.73
            7 / - / 3.07
            Y / Z / 3.08
            4 / D / 3.42
            F / R / 3.45
            5 / E / 3.27
            6 / W / 3.73
            2 / K / 3.55
            A / - / 3.63
            J / - / 3.85

            Comment


              #7
              Hmm, thats interesting. I never realized distilled water would pick crap up like that. I use tap water here, its not horrible but it does have some lime and chlorine in it.
              86 Lincoln Town Car (Galactica).
              5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

              91 Lincoln Mark VII LSC grandpa spec white and cranberry

              1984 Lincoln Continental TurboDiesel - rolls coal

              Originally posted by phayzer5
              I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

              Everything looks like voodoo if you don't understand how it works

              Comment


                #8
                My car is lucky if I use anything but tap water in it.
                1989 Grand Marquis LS
                flat black, 650 double pumper, random cam, hei, stealth intake, Police front springs, Wagon rear, Police rear bar, wagon front ,exploder wheels, 205/60-15 fronts 275/60-15 rears, 1 5/8" headers, 2.5" offroad x pipe, Eclipse front bucket seats, Custom floor shifter, 4.10 gears, aluminum driveshaft and daily driven. 16.77@83mph

                Comment


                  #9
                  I use it. It worked. the needle is almost at 20 mph mark on the mm nate.

                  2005 Legacy GT *13.5 @ 96MPH*
                  2003 Mercury Marauder *Totaled*

                  Comment


                    #10
                    I've seen it in action. Dropped my buddy's B2200 Mazda 24* at all times.

                    As for the water, I run tap water/antifreeze and flush it every few oil changes.
                    2011 Mustang GT Premium, MT82, Kona/Saddle, HIDs, 3.73s, 19s, hood/side stripes, UPR 1.5" springs with adjustable panhard bar, and UMI solid LCAs and relocation brackets.
                    1992 Explorer Eddie Bauer, slight lift, 34s, and A/C...
                    1979 Bronco Custom, 351M/C6/NP205, 4" lift, 35s, lots of fender trimming.

                    Comment

                    Working...
                    X