I tried changing my coolant temperature sensor and ending up shearing it in half today. I don't know why it did that, it just sheared right in half so half of the brass sensor is in the coolant temp housing. Can I easily replace the housing that the coolant temperature sensor is in, or is it worse than I thought?
 |
-
Current rides - 1991 Ford Thunderbird 3.8 v6 (gas saver/DD) - New Heads/Headgaskets with ARP studs, Air Silencer Delete, 70mm MAF, Plasti-dipped Matte Black with a Silver Metalflake Overlay, Muffler Delete, some LED's, 30.233 MPG for high MPG average!
2006 Jeep Wrangler 4WD (fun vehicle/backup DD) - 4.0/6spd - too many mods to list.
Associated Panthers:
Father's 1994 Ford Crown Victoria - Stock, 45,000 miles.
Sold in 2007 - 1987 Mercury Grand Marquis LS "Grandpa Special" 2 door.
http://www.cardomain.com/ride/2128327 -
Chances are if your temp sensor was in bad enough shape to break, the neck/pipe that screws into the intake manifold might break also, its make of monkey metal.
If you dont have em, get lots of rust buster solvent and a small propane torch. Let some penetrator soak in multiple applications and apply gentle heat to the manifold all around the pipe. (after blotting up excess spray)
Then pray you can get it out. Replacing it is no sweat, you can use brass pipe fitting from Lowes. Just typing about it makes me want to do it to mine just to see shiney new things under the hood, HHmmm...
You could also try to drill and extract the rest of the sensor out of the pipe with a simmilar heat method, but Id think it would be easier to take out the whole thing.Pete ::::>>> resident LED addict and CFI defector LED bulb replacements
'LTD HPP' 85 Vic (my rusty baby) '06 Honda Reflex 250cc 'Baileys' 91 Vic (faded cream puff) ClifFord 'ODB' 88 P72 (SOLD) '77 LTDII (RIP)
sigpic
85HPP's most noteworthy mods: CFI to SEFI conversion w/HO upperstuff headers & flowmasters P71 airbox Towncar seats LED dash light-show center console w/5 gauge package LED 3rd brake light 3G alternator mini starter washer/coolant bottle upgrade Towncar power trunk pull underhood fuse/relay box 16" HPP wheels - police swaybars w/poly rubbers - budget Alpine driven 10 speaker stereo -
+1 on the heat thing. Thats how we had to get my coolant pipes out of my lower intake when I changed it. Stupid thing was seized in the manifold.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousersComment
-
gotta use some heat mang........keep a wet rag handy for keeping surrounding areas cool
1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
2006 Lincoln Town Car Signature. Stock for now
1989 Ford F-250 4x4 much much more to come, sefi converted so far.
1986 Toyota pickup with LSC wheels and 225/60/16 tires.
2008 Hyundai Elantra future Revcon toad
1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)
please be patient, rebuilding an empire!
Comment
-
Thanks for the advice, the housing came right out with some rust solvent and a small propane torch that I borrowed from my friend. Took 20 minutes and so far the new brass housing isn't leaking after a 20 mile drive. Its nice to be able to get the car to idle again.
Current rides - 1991 Ford Thunderbird 3.8 v6 (gas saver/DD) - New Heads/Headgaskets with ARP studs, Air Silencer Delete, 70mm MAF, Plasti-dipped Matte Black with a Silver Metalflake Overlay, Muffler Delete, some LED's, 30.233 MPG for high MPG average!
2006 Jeep Wrangler 4WD (fun vehicle/backup DD) - 4.0/6spd - too many mods to list.
Associated Panthers:
Father's 1994 Ford Crown Victoria - Stock, 45,000 miles.
Sold in 2007 - 1987 Mercury Grand Marquis LS "Grandpa Special" 2 door.
http://www.cardomain.com/ride/2128327Comment
Comment