Announcement

Collapse
No announcement yet.

rough Idle problem lives on, wasn't the injector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    rough Idle problem lives on, wasn't the injector

    OH MY G-HOD, I have about had it with trying to find the source of this thing. I'm going to check the timing 1 more time, and if thats not it than I don't know what I'm going to do.
    1989 Lincoln Town Car - "Anabelle" - Original block, .030 over with SpeedPro pistons, rods fitted with ARP hardware, FRPP +volume oil pump, GT-40 3bar heads, Crane 1.72 rockers, 89' Fox cam, 93' Cobra lower intake, Explorer upper and 65mm TB, 93' Lightning EGR spacer, K&N intake kit from a 4.0L Ranger, 19lb/hr injectors w/ 87 Mark VII ECM, cat/smog deletes, Big Brake conversion, 3.55 K-Code Trac-Lok/Disc brake rear axle, CVPI LCA's w/1" sway bar in rear, wagon front sway bar, BBK 2.5" off-road H-Pipe, Flowmaster super 40s, HPP wheels, 3G alternator w/LMR.com wiring kit, gear reduction starter conversion, Best 1/4 time: 16.0 @ 85mph.

    #2
    You know scott and thain will be enear there on the way home, right?

    PM me...
    1983 Grand Marquis 2Dr Sedan "Mercules"
    Tremec TKO conversion, hydraulic clutch, HURST equipped!

    Comment


      #3
      This is just crazy. Now I have doubts about converting to Stock FI on my car.
      Pebbles-1968 Ford F250
      Pile of Junk! An Electronics Project Site (To get wet by)<---Clicky! NEW STUFF!!!!

      Comment


        #4
        When are Scott and Thain comming through Raleigh??? I really need their help, b/c no shop will work on my lincoln because its no origional.
        1989 Lincoln Town Car - "Anabelle" - Original block, .030 over with SpeedPro pistons, rods fitted with ARP hardware, FRPP +volume oil pump, GT-40 3bar heads, Crane 1.72 rockers, 89' Fox cam, 93' Cobra lower intake, Explorer upper and 65mm TB, 93' Lightning EGR spacer, K&N intake kit from a 4.0L Ranger, 19lb/hr injectors w/ 87 Mark VII ECM, cat/smog deletes, Big Brake conversion, 3.55 K-Code Trac-Lok/Disc brake rear axle, CVPI LCA's w/1" sway bar in rear, wagon front sway bar, BBK 2.5" off-road H-Pipe, Flowmaster super 40s, HPP wheels, 3G alternator w/LMR.com wiring kit, gear reduction starter conversion, Best 1/4 time: 16.0 @ 85mph.

        Comment


          #5
          Originally posted by 89LincolnTWNcar
          When are Scott and Thain comming through Raleigh??? I really need their help, b/c no shop will work on my lincoln because its no origional.
          PM me your phone number, mang....
          1983 Grand Marquis 2Dr Sedan "Mercules"
          Tremec TKO conversion, hydraulic clutch, HURST equipped!

          Comment


            #6
            Nobody understands non-stock Lincoln. Its a Mark VII with a backwards intake and people act like its something magical and mysterious. I'd love to drop my car off somewhere and ask for the brakes to be checked. I'd get an estimate with some huge bill for replacing half the front suspension with "correct" parts.
            86 Lincoln Town Car (Galactica).
            5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley

            91 Lincoln Mark VII LSC grandpa spec white and cranberry

            1984 Lincoln Continental TurboDiesel - rolls coal

            Originally posted by phayzer5
            I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers

            Comment

            Working...
            X