90 town car fan shroud and overflow, aero airbox and washer tank

[1990LTD]

Does anyone have a good close up pic of the mounting of these? I think I got the washer bottle where it needs to be (the air box can only really go in one place) and want to make sure.


tanks bah!

[1990LTD]

hey, a mod could delete this, i found what i was looking for buried in the sometimes useful search function.

[GM_Guy]

Add a link to the thread you found it in, it'll increase the odds of somebody finding it in the future when they check this thread.

Alex.

[86VickyLX]

I've seen a couple of different setups on how the washer bottle is mounted. On my car, it's mounted in a pre-existing threaded hole on the fender, below the threaded hole that the fender to rad support braces bolt, I didn't need two, because the bottom on the one side is level with the inner fenderwell... I also used a Grand Marquis/Crown Vic washer bottle. The TownCar bottle is different and weirdly shaped. It's useable, I've seen one setup where the bottle bolts to the same hole for the fender brace, then a second bolt to support the other end.

The 90 TownCar shroud bolts in in place of your other one, you shouldn't have to do any modifications, if any, you may need to drill some holes for your radiator to line up to the shrouds holes at the top for the retaining bolts. And the hose just goes from the bottle to your radiator.

[1990LTD]

The trick will be getting wires tucked neatly.