You don't need to use the little elbow that comes with the PCV valve, do you? I don't see why you would but I thought I'd ask you guys given the fact that I can wire a distributor backwards and not notice.
 |
-
sigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stock -
to clarify:
sigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stock -
not on your SEFI engine. that elbo is intended for the older carbed and CFI engines that have the PCV valve it the rocker cover oil cap.
1981 Mercury Marquis Brougham 2-Door 302/ 5-speed -special blend (GMGT)
1987 Lincoln Mark VII 5-speed (Errand runner)
1989 Mercury Grand Marquis (Base Runner)
2007 Lincoln Town Car Signature Limited (Hustlyn)
2011 Ford Crown Victoria Police Interceptor (Down with O.P.P)Comment
-
I figured it was for the valve cover type breather - thanks man!sigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stockComment
-
no worries young blood! lol
1981 Mercury Marquis Brougham 2-Door 302/ 5-speed -special blend (GMGT)
1987 Lincoln Mark VII 5-speed (Errand runner)
1989 Mercury Grand Marquis (Base Runner)
2007 Lincoln Town Car Signature Limited (Hustlyn)
2011 Ford Crown Victoria Police Interceptor (Down with O.P.P)Comment
-
we can just cap off the second hole?
I did my pcv valve over the summer, but actually now I can't remember what I did... hope it's not been blowing oil all this time
What did another poster mean by the "pcv trifecta"? It's just that one valve, right? Or are there two other components to address?Comment
-
Take it off the valve. The trifecta, I would imagine would be the PCV valve, the PCV screen and the PCV grommet. All should be replacedComment
-
Odd, none of the motorcraft filters I've bought to date have come packed with the 90º elbow. Just a straight pcv valve in a sealed bag.
Alex.Comment
-
The generic ones you get from Fram at Wal-Mart have the elbow.91 Mercury CP, Lopo 302, AOD, 3.08LSD. 3g upgrade, Moog wagon coils up front, cc819s in the back. KYB GR-2 police shocks. Energy suspension control arm bushings. Smog deleted.Originally posted by gadget73
93 F-150 XLT, 302, ZF 5-spd from 1-ton, 4wd.
Daily--07 Civic Coupe. Bone stock with 25k miles
Wife--14 Subaru Outback. 6-speed.
95 Subaru Legacy Wagon--red--STOLEN 1/6/13Comment
-
Last one I used had the elbow as part of the valve, couldn't remove it. I can't remember what brand it was though.sigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stockComment
-
The one I picked up at Carquest was made with the 90. I actually didn't try to remove it...I was replacing the rubber hose anyway and had a 90 to go down to the factory configured valve. I just rotated it to line up to the Carquest valve.Comment
-
Pulled off of the one i used on my car. I'm not dealing with any more plastic than i need to.
In an unrelated note, that pcv valve is used on aeros too and uses both fittings.Last edited by 86VickyLX; 03-15-2011, 01:39 AM.Comment
-
yeah the 95 has the same one in the valve coversigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stockComment
-
Comment
-
i kinda thought the screen should always be replaced as well...1985 Mercury Grand Marquis ls-302 CFI
Carb swap planned .
c90 heads
475 lift cam
Weind stealth intake(looking for reasonable air gap or manifold for 2bblsidedraft)
Built aod(want c6 tryin to fin vac mod model)
331 stroker kit
Work in progressComment
Comment