Engine Swap question
Would it be easier to remove the lopo engine with the trans attached, and install the HO with trans attached, or just pull the engine and install the HO? Also are replacement motor mounts readily available for my car (mounts are original)?
 |
-
2011 Grand Marquis LS Ultimate Edition
Dual Exhaust w/ AP XLerator mufflers and 3 1/2" tips, Eibach 1" rear sway bar, Pioneer Head unit and speakers, 17X8 Drag DR-72 wheels
RIP 1984 2Dr Crown Vic "The Millennium Falcon"
Carbed 5.0 HO w/nitrous , Performer RPM intake, GT40P heads, E303 cam, FRP Shorties, FRP 9mm plug wires, Off-Road H-pipe, Magnaflow round mufflers, 2000 rpm stall
NA-15.78@91.21, 80hp shot-14.48@96.21 -
never had much luck pulling an engine with trans. Sounds like it ought to be easier, but I have never seen it actually work like expected. Maybe with an overhead chain hoist.
mounts are obtainable, but its a bitch to change them with the lower control arms in place. Pull the LCA and its cake.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers -
on-topic, so I hope this isn't thread jacking, but how many motor mounts are there on one of our engines? where?sigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stockComment
-
I did mine this spring with the trans attached, it was a piece of cake.. Hardest part was getting the shifter linkage out of the bushing.Give a man a fish and he will be fed for a day. Teach a man to fish and he will promptly forget that he once did not know, and proceed to call anyone who asks, a n00b and flame them on the boards for being stupid.Comment
-
rermove rad, fan,crank pulley and trans crossmember, motor/trans will pass out no problem!Comment
-
Never removed motor and trans at the same time, but just motor is pretty damn easy.
I would never even consider trying to change the motor mounts again without pulling the lower control arms. Its possible, but not worth it by any stretch of the imagination.
1984 Grand Marquis GS - CFI-SEFI conversion, Explorer 302, GT40 intakes, GT40P heads, 1.7 roller rockers, HO Cam, ASP Underdrive Pulley, 2.5" Dual exhaust, Flowmaster Delta 50 mufflers, 3.55 Trac-Lock, Rear disk's, Moog cargo coils, ES rear poly bushings, PI front and rear sway bars, 3G alt., Mark VIII fan, custom Auto-meter dash
1990 Crown Victoria Country Squire - Explorer 302, HO cam, dual exhaust, 3.55 Trac-Lock, PI rear sway bar (SOLD)
1982 LTD Wagon (R.I.P.) -|-1984 Grand Marquis LS(R.I.P.)Comment
-
waste of time separating them,Comment
-
Thanks for the advice. I will be using an A-frame and a chain hoist for the removal and install.
2011 Grand Marquis LS Ultimate Edition
Dual Exhaust w/ AP XLerator mufflers and 3 1/2" tips, Eibach 1" rear sway bar, Pioneer Head unit and speakers, 17X8 Drag DR-72 wheels
RIP 1984 2Dr Crown Vic "The Millennium Falcon"
Carbed 5.0 HO w/nitrous , Performer RPM intake, GT40P heads, E303 cam, FRP Shorties, FRP 9mm plug wires, Off-Road H-pipe, Magnaflow round mufflers, 2000 rpm stall
NA-15.78@91.21, 80hp shot-14.48@96.21Comment
-
two, one per side, roughly center of the engine down near the oil pan. They're the large brackets that bolt to the under-engine crossmember. You may find reference to the rear engine mount, and thats the transmission mount.Originally posted by 1990LTD View Post86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousersComment
Comment