just need to know how to get that damn cable off the throttle body lever so i can swap levers onto my HO TB. lol. thanks.
 |
-
Finally have an on the books porting/custom fab business!
HO bottom end,GT40Ps,cut/welded/ported upper+lower GT40 intakes,Comp XE258 cam,MS3X megasquirt computer,8 LS2 coils,2 dry systems + a 3rd wet,3 core rad w fans..1100hp Lentech WR AOD,custom 4" aluminum/moly Dshaft,custom rear/back half chassis adjustable 4link,wilwood 4 piston,moser 9" axles,locker, M/T 30x12's,4 staged fuel pumps,100lbs sound insulation,power/remote everything,2000W sound.4480lbs. 4.5s 0-60,12.8 1/4
-
Do you mean the rubber bushing holding it on there? If so, make sure you have the replacement brass one handy, and start very carefully cuttin' the rubber up if you can't pry it off of there by hand.sigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stock -
I know how to get it off:
Comment
-
if i could i would like to use all the same parts and bushing but i just need to get the throttle body off the car (that damn tv line) fo an hour to put the lever on my HO tb and take it to my uncles to weld it on. Then if i could, just use the same stuff and throw er back on with the rubber bushing.Finally have an on the books porting/custom fab business!
HO bottom end,GT40Ps,cut/welded/ported upper+lower GT40 intakes,Comp XE258 cam,MS3X megasquirt computer,8 LS2 coils,2 dry systems + a 3rd wet,3 core rad w fans..1100hp Lentech WR AOD,custom 4" aluminum/moly Dshaft,custom rear/back half chassis adjustable 4link,wilwood 4 piston,moser 9" axles,locker, M/T 30x12's,4 staged fuel pumps,100lbs sound insulation,power/remote everything,2000W sound.4480lbs. 4.5s 0-60,12.8 1/4
Comment
-
Don't reuse the rubber bushing. They have been known to fail, and cook transmissions. Instead, get a brass replacement from your friendly Ford dealer #F3SZ-7H303-B. It's held in with a cotter pin, rather than just being held in by friction. Much safer.91 Mercury CP, Lopo 302, AOD, 3.08LSD. 3g upgrade, Moog wagon coils up front, cc819s in the back. KYB GR-2 police shocks. Energy suspension control arm bushings. Smog deleted.Originally posted by gadget73
93 F-150 XLT, 302, ZF 5-spd from 1-ton, 4wd.
Daily--07 Civic Coupe. Bone stock with 25k miles
Wife--14 Subaru Outback. 6-speed.
95 Subaru Legacy Wagon--red--STOLEN 1/6/13Comment
-
If its the plastic bushing, just pull the cable straight down. If its the brass one with the hairpin clip on top, pull the clip and the cable should fall out the bottom. Don't lose the brass bushing or the clip.
+1 on tossing the plastic thing for a brass one. You'll never have to worry about it again.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousersComment
-
Once I had the plastic one off, it was pretty easy to see how flimsy it was. It was actually brittle and disintegrated
I kept it in the same bag on a shelf with the spare brass bushing that Scott sent me and I went to take a picture one day to compare the old one vs the new one and all that was in the bag were little pieces of black plastic, black dust, and a brass TV bushing
sigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stockComment
-
alright I got it. It's the black rubber one I got on there and doing all this work on the car in the -10*C un-insulated garage made that rubber like steel lol. I just heated the rubber up a little and pulled the pin out. got the lever on my HO TB fine to! ...those bushings inside the coil return spring on the throttle lever don't like welding level heat to much BTW. The rubber is in great shape so i'll leave it until spring and get a brass bushing for it.Finally have an on the books porting/custom fab business!
HO bottom end,GT40Ps,cut/welded/ported upper+lower GT40 intakes,Comp XE258 cam,MS3X megasquirt computer,8 LS2 coils,2 dry systems + a 3rd wet,3 core rad w fans..1100hp Lentech WR AOD,custom 4" aluminum/moly Dshaft,custom rear/back half chassis adjustable 4link,wilwood 4 piston,moser 9" axles,locker, M/T 30x12's,4 staged fuel pumps,100lbs sound insulation,power/remote everything,2000W sound.4480lbs. 4.5s 0-60,12.8 1/4
Comment
-
trust me on this, get the brass bushing asap. $5 for a bushing or $1000 for a transmission. Easy math.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousersComment
-
Coming from someone whos had the rubber bushing fail. Buy the brass one. Now.2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIPComment
-
I bought mine from Scott he might be able to sell you some... I couldn't find any locallysigpic
- 1990 Ford LTD Crown Victoria P72 - the street boat - 5.0 liter EFI - Ported HO intake/TB, 90 TC shroud/overflow, Aero airbox/zip tube, Cobra camshaft, 19lb injectors, dual exhaust w/ Magnaflows, Cat/Smog & AC delete, 3G alternator, MOOG chassis parts & KYB cop shocks, 215/70r/15s on 95-97 Merc rims
- 2007 Ford Escape XLT - soccer mom lifted station wagon - 3.0 Duratec, auto, rear converter delete w/ Magnaflow dual exhaust
- 2008 Mercury Grand Marquis Ultimate Edition - Daily driver - 4.6 2 valve Mod motor, 4R75E, 2.73s. Bone stockComment
Comment