herd ya guys talk about codes... how do i check them

[83countrysquire]

Just was wondering how do i check the codes

[86VickyLX]

http://fordfuelinjection.com/?p=13

Right here my good friend. I rigged up a nice plug setup that I can just plug right into the test connector, and then attatch to the battery. btw, you don't have a check engine light, so you will need a test light for best results. You could use a gauge light if you have one. Make sure that when you do the running test, that the car is at normal operating temperature. If you don't want to do it the way mentioned at the website above, you can go spend 40 or so dollars and buy the ford tester.

[89crownvicjax]

hey 86vickylx .... what is the name of the tester for the 89 crown vic and where can i find it.

[86VickyLX]

Uh, Actron I think. They make all kinds of scanners for different vehicle makes. Be sure to get the Ford EEC-IV code scanner if you plan on getting it. You can probably get it at any autoparts store. Pepboys, Autozone, and some of the local auto stores should have them.