what are the sizes to motor mount bolts the two to the block,centerbolt,and the three that goto the frame are these metric or standard
 |
-
-
The two that go into the block are standard, probably 3/8" by about 1 1/4". The one that goes through the middle, no clue but probably metric. Through the frame I suspect may also be metric but not sure.86 Lincoln Town Car (Galactica).
5.0 HO, CompCams XE258,Scorpion 1.72 roller rockers, 3.55 K code rear, tow package, BHPerformance ported E7 heads, Tmoss Explorer intake, 65mm throttle body, Hedman 1 5/8" headers, 2.5" dual exhaust, ASP underdrive pulley
91 Lincoln Mark VII LSC grandpa spec white and cranberry
1984 Lincoln Continental TurboDiesel - rolls coal
Originally posted by phayzer5
I drive a Lincoln. I can't be bothered to shift like the peasants and rabble rousers -
Junk yard.1984 CV tudor 351W, 4bbl, 5-speed best time in the 1/8 8.39 at 80 with 1.80 60ft time.
2006 P71, 1988 Bronco II, 1986 Baby LTD(5.0 & T5 swap in progress), 1976 16' Hobie Cat, 12' AquaFinn
http://www.cardomain.com/ride/2651997 UPDATED 20100826
sigpicComment
-
The motor mount bolts have tapered ends. So they are easy to start. Why do you ask about the sizes mang?Comment
Comment