Good bye cats, dada, good by back pressure, + a poll

[Grand Marquis GT]

As far as that y shaped tube, just :hacksaw: the pipe off, and turn them around and block em off, simple as that.

[petely]

heh, this posts are starting to piss me off. Well I was in a pissed off mood before, now I am more pissed

piss

[gsn2984]

Why is these posts starting to piss you off? BTW, I sent the tripminder out this morning, I'll get you the tracking number later. But what is the problem? You can't be in a pissed mood because your getting your trip minder.

[Grand Marquis GT]

Hes pissed cause hes got sand in his vagina.

If you dont like it, get the fuck out you whiney peice of shit.

[p71towny]

I should have run my towncar open manifolds. It sounded tough and then I couldn't hear anything. 4.6 sounds funny from open manifolds. the 5.0 was more quiet open manifold

[gsn2984]

Drivers side has been completed. I cut the cat off with the sawzall. It took a little while to get it off. I also did not know that the cats were that heavy. A little more weight lost I guess... In ricer terms... 1 pound of weight = 10 HP... I just added 100 HP! HAHAHA. Now I have to cut off the passenger side. The one downside to that side is that it is sorta off of my driveway and in the rocks. At least I brought a towel. I'll get pics once I am done. The first one was a little short but I was able to make it fit and then I clamped one side and muffler welded the other side damn good. I just hope it doesn't break. I will probably put on an extra support before tomorrow just to make sure. I will not be gutting the cats to put the tubes through because like I said before, what officer will look under. Just wanted to update everybody... Soon as I get the other side done I will take some pictures.

[Grand Marquis GT]

woo! :hacksaw:

Cant wait!

[gsn2984]

Well, it is finally in. Only took a couple more hours than I had expected. After I finished the drivers side, I started to cut off the passenger side... and it made the whole H pipe fall down. I was like FUCK!!! So I ran and got my jackstand to hold up the pipes. I got the passenger side on after about an hour trying to bitch slap it into place. I got that in and muffler welded it together, along with using hose clamps and muffler clamps to make it so that it doesnt go anywhere. I then refixed the drivers side doing the same thing. I'll take pics in the morning because it is a little late right now. After I take some pics I will run the engine to make sure that everything is secure and nothing leaking. If it is, I bought some wrapping type stuff that you put into a solution, then wrap the pipes and it supposed to be like a hardener. So If anything is leaking, I do have something to use still. But until then, I hope it will work perfectly.

[petely]

That day everything went wrong, bike stolen, car battery dead, suit jacket lost, failed quiz, missed class, could not make important meeting.

Yay for trip minder. :jumpin:



Tom, wtf do you want me out. Whatever, I am out if that is your wish.

[Grand Marquis GT]

Im sorry dude...

Seriously, I was having a pretty bad couple of days myself, arguing with the wife...

[gsn2984]

Here are a couple pictures for you guys, sorry about the clarity, I used my picture phone because it is easier to upload them to the web because I dont need to download them to a computer.
In this pic, you can see part of my undercar LED lighting. To make sure for now that the exhaust still does not come apart/ fall down, I used some large hose clamps and connected it to the transmission brace.

[Grand Marquis GT]

Well, it doesnt look pretty...

But it works!!! :rock: :hacksaw:

[gsn2984]

Well, for a day it sounded good, but I knew I had a leak somewhere. Aparently it was on the muffler. I was finally able to get the back up on the ramps and went under, shure enough. When I dropped the H pipe down, it broke to holders off on the drivers side muffler. There was one big hole (Dollar Coin Size) and a couple small ones from the other retainer. I got some more muffler weld but Autozone was out of the patches ... whatever it is. It looks like the screens on doors and windows, so that is what I used. I had some extra so I used that and some muffler weld and now it is drying. My drivers side pipe that I put on also sprouted a hole so I had some muffler wrap that looked a lot like plaster of paris, and made sure to wrap it really good. I won't fully know until morning if I sealed up all the leaks, but hopefully I did. And it will sound good finally, it did, but that was also with the leak in the muffler.