I picked up the wire but no time between an interview I just had and work to do the harness, plugs, and wires, so I'll just wait until the morning.
 |
-
2011 Mustang GT Premium, MT82, Kona/Saddle, HIDs, 3.73s, 19s, hood/side stripes, UPR 1.5" springs with adjustable panhard bar, and UMI solid LCAs and relocation brackets.
1992 Explorer Eddie Bauer, slight lift, 34s, and A/C...
1979 Bronco Custom, 351M/C6/NP205, 4" lift, 35s, lots of fender trimming. -
Didn't have 10 minutes? That's pretty busy! LOLBuilder/Owner of Badass Panther Wagons
Busy maintaining a fleet of FordsComment
-
Ten minutes for plugs and wires? With the stock smog equipment in place? Good luck on that...
New plugs, wires, and ignition coil harness and it's still not even starting. It's sending spark through the wires... guess I need to check the timing now.2011 Mustang GT Premium, MT82, Kona/Saddle, HIDs, 3.73s, 19s, hood/side stripes, UPR 1.5" springs with adjustable panhard bar, and UMI solid LCAs and relocation brackets.
1992 Explorer Eddie Bauer, slight lift, 34s, and A/C...
1979 Bronco Custom, 351M/C6/NP205, 4" lift, 35s, lots of fender trimming.Comment
-
it can be done in ten minutes......but that's rushing
1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
2006 Lincoln Town Car Signature. Stock for now
1989 Ford F-250 4x4 much much more to come, sefi converted so far.
1986 Toyota pickup with LSC wheels and 225/60/16 tires.
2008 Hyundai Elantra future Revcon toad
1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)
please be patient, rebuilding an empire!
Comment
-
I decided I'm going to pull the motor when I do the HO conversion. I may get my hands on a low mile short block. If I can, I'm gonna build the whole thing and swap over all the brackets and other niceties to the complete engine. It'll make it easier, in my opinion. Easier because this smog stuff must go.2011 Mustang GT Premium, MT82, Kona/Saddle, HIDs, 3.73s, 19s, hood/side stripes, UPR 1.5" springs with adjustable panhard bar, and UMI solid LCAs and relocation brackets.
1992 Explorer Eddie Bauer, slight lift, 34s, and A/C...
1979 Bronco Custom, 351M/C6/NP205, 4" lift, 35s, lots of fender trimming.Comment
-
that's how i did my swap on the towny........secured a 42,000 mile ho shortblock for 150 bucks, bought a pair of thumper heads, got ported intakes on ebay, ho cam from nitrous al, injectors, throttle body, ecm, from the junkyard........got all the pieces together with new gaskets, water pump, balancer, valve covers, and put it all together in a weekend..........next weekend i swapped the engine, and here we are 22,000 miles later
1986 lincoln towncar signature series. 5.0 HO with thumper performance ported e7 heads, 1.7 roller rockers, warm air intake, 65mm throttle body, 1/2" intake spacer, ported intakes, 3.73 rear with trac lock, 98-02 front brake conversion, 92-97 rear disc conversion, 1" rear swaybar, 1 3/16" front swaybar, 16" wheels and tires, loud ass stereo system, badass cb, best time to date 15.94 at 87 mph. lots of mods in the works 221.8 rwhp 278 rwt
2006 Lincoln Town Car Signature. Stock for now
1989 Ford F-250 4x4 much much more to come, sefi converted so far.
1986 Toyota pickup with LSC wheels and 225/60/16 tires.
2008 Hyundai Elantra future Revcon toad
1987 TriBurner and 1986 Alaska stokers keeping me warm. (and some pesky oil heat)
please be patient, rebuilding an empire!
Comment
Comment