If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Please let us know if things are working or not. This is still somewhat a work in progress so don't be too surprised if things magically appear from one visit to the next.
Yep, it'll all swap over. Brakes are the same, axles are the same minus gear's (check the build date, 12/04 is when they went to 31 spline)
Springs and swaybar's swap right over.
You can skip the p71 all together and just buy much better aftermarket parts as well.
I have a 2010 Town Car, that I got with 419,xxx miles, and factory rear spring suspension. I replaced the front struts, and upper control arms, along with the rear springs, and shocks with PI parts. Everything is a direct bolt in, and not that much more than stock parts. The ride/handling/tracking of the car is immensely improved, and the ride quality did not suffer. The tighter ride actually makes the car more comfortable to drive. The brakes are the next thing to be done with PI parts, and yes, it's all bolt in. If/when extra money is available, I want to upgrade the rear control arms/Watts link/sway bar, with ADTR parts, along with the front sway bar.
Mike
Comment