Hi everyone! I'm looking for a few different pieces for my 85 vic. Some may be able to be sourced from other vehicles. In general, I'm looking for good but not necessarily NOS stuff. No peeling chrome, no visible (when on the car) corrosion, no obvious dents, etc.
I'm located in the Greater Toronto Area and can pick up basically between windsor and kingston and huntsville if the parts warrant it, OR pay via paypal.
Parts wanted:
Front fenders, without holes for 'parking lamps' ahead of the wheel well. Blue or black preferred, but must be free of significant dents and ANY rust on the outside.
Chrome/polished door and fender trims Basically any parts other than the trim at the base of the windshield on the hood. Must be free of dents and any significant clear coat cracking.
bumpers Must be free of bends and rust, and MUST not have the rubber strip that runs horizontally the width of the bumper. Don't care if it has the big vertical plastic bumpers or not. Will pay fair price for good stuff.
window switches Mint interior switch panels, for any door. Driver's door must be power locks and windows but not power mirrors.
dark blue steering wheel Can be missing the horn button/horn cover. Doesn't need to look 100% new but will preferrably have most of the texturing still intact.
tail lights Must be NOS or really minty. mine aren't broken, just old looking. prefer the type with horizontal rectangular sections, but will consider earlier versions (with LTD script) as well
edelbrock 351W dual plane intake with egr/heated crossover Probably something for pickup within ontario. Ugly/dirty isn't an issue as long as it's the gasket surfaces are nice
windshield wiper stalk - 2 speed Chrome, non-intermittent, must have no peeling/flaking.
Ford blue ovals must be at least the original size used for the grille or trunk and in mint or NOS condition
15 inch wire wheel covers Again, looking for very nice condition. Few if any bent spokes, nothing broken, nice chrome.
silver accent from bottom of trunk lid You know that silver strip that runs the width of the trunk lid right above the bumper? Mine's peeling and I need a minty new one.
2 1/2 inch or larger tailpipes, offset/offset mufflers, locking header bolts I'm trying to finish off my exhaust and do it right. Any mufflers louder than 'turbos' and less drony than flowmaster 40s will be of interest.
aluminum/racing/hi-po differential cover Appearance and brand not a big issue as long as the sealing surface is nice. Please have a pic or part number since there are a dizzying number of options.
MINT/NOS grill Must be one that can have/does have ford oval and have no flaws visible from about 5 feet away.
2 1/6 black face tach Something that works well and sorta matches the factory gauges.
retrofit/linkbar roller rockers All small block ford types will work. Must be complete set and, obviously, in good condition.
3.27 gears
1979-1987 Panther shop manuals
Anything Crown Vic trim that you don't see listed, it may be worth sending me a PM as I'm sure I forgot some stuff
Tell me what you have and attach a price. I'm looking to have what I need to get this thing where it needs to be, and will be reasonable.
I know roughly what shipping from the US costs and will pay the price for the right example of anything listed above.
I'm located in the Greater Toronto Area and can pick up basically between windsor and kingston and huntsville if the parts warrant it, OR pay via paypal.
Parts wanted:
Front fenders, without holes for 'parking lamps' ahead of the wheel well. Blue or black preferred, but must be free of significant dents and ANY rust on the outside.
Chrome/polished door and fender trims Basically any parts other than the trim at the base of the windshield on the hood. Must be free of dents and any significant clear coat cracking.
bumpers Must be free of bends and rust, and MUST not have the rubber strip that runs horizontally the width of the bumper. Don't care if it has the big vertical plastic bumpers or not. Will pay fair price for good stuff.
window switches Mint interior switch panels, for any door. Driver's door must be power locks and windows but not power mirrors.
dark blue steering wheel Can be missing the horn button/horn cover. Doesn't need to look 100% new but will preferrably have most of the texturing still intact.
tail lights Must be NOS or really minty. mine aren't broken, just old looking. prefer the type with horizontal rectangular sections, but will consider earlier versions (with LTD script) as well
edelbrock 351W dual plane intake with egr/heated crossover Probably something for pickup within ontario. Ugly/dirty isn't an issue as long as it's the gasket surfaces are nice
windshield wiper stalk - 2 speed Chrome, non-intermittent, must have no peeling/flaking.
Ford blue ovals must be at least the original size used for the grille or trunk and in mint or NOS condition
15 inch wire wheel covers Again, looking for very nice condition. Few if any bent spokes, nothing broken, nice chrome.
silver accent from bottom of trunk lid You know that silver strip that runs the width of the trunk lid right above the bumper? Mine's peeling and I need a minty new one.
2 1/2 inch or larger tailpipes, offset/offset mufflers, locking header bolts I'm trying to finish off my exhaust and do it right. Any mufflers louder than 'turbos' and less drony than flowmaster 40s will be of interest.
aluminum/racing/hi-po differential cover Appearance and brand not a big issue as long as the sealing surface is nice. Please have a pic or part number since there are a dizzying number of options.
MINT/NOS grill Must be one that can have/does have ford oval and have no flaws visible from about 5 feet away.
2 1/6 black face tach Something that works well and sorta matches the factory gauges.
retrofit/linkbar roller rockers All small block ford types will work. Must be complete set and, obviously, in good condition.
3.27 gears
1979-1987 Panther shop manuals
Anything Crown Vic trim that you don't see listed, it may be worth sending me a PM as I'm sure I forgot some stuff
Tell me what you have and attach a price. I'm looking to have what I need to get this thing where it needs to be, and will be reasonable.
I know roughly what shipping from the US costs and will pay the price for the right example of anything listed above.
Comment