List The Stuff You Guys Are Going To Be Selling At Scottfest 2011

[1980c10]

Hooray for the booster. Would anyone like to to do some head and intake trading. I have a set of big valve ported 289 heads with screw in studs. The have 1.94-1.60 valves and 1.7 roller rockers. I also have a edelbrock performer rpm intake to go with the heads. I would like to trade this setup for a set of gt40/gt40p heads and a explorer intake. I also
have a holley carb to go with that setup, it's a 750 dual line double pumper with mechanical secondaries and manual choke. I would like to trade the holley for a 70mm throttle body.

Will also sell everything outright if anyone is interested

assembled heads with roller rockers $300 obo
edelbrock performer rpm intake $100 obo
holley 750 $150 obo
everything together $500 obo
I would much rather trade for the gt40 stuff but will sell.

[1980c10]

Oh yea also have a plate nitrous system for a carb. It's a sniper kit, it has everything except the bottle bracket other than that it is a complete kit. It has jets for 100,125,150 horsepower. I have only ran 2 bottles through this kit. Payed $350 for it will sell for $200 obo.

[Grand Marquis GT]

What year? Stick or Auto?

Ed,

I am shocked that I missed this. You got PM.

Tom

[Mercracer]

Would anyone like to to do some head and intake trading. I have a set of big valve ported 289 heads with screw in studs. The have 1.94-1.60 valves and 1.7 roller rockers. I also have a edelbrock performer rpm intake to go with the heads. I would like to trade this setup for a set of gt40/gt40p heads and a explorer intake. I also
have a holley carb to go with that setup, it's a 750 dual line double pumper with mechanical secondaries and manual choke. I would like to trade the holley for a 70mm throttle body.

Will also sell everything outright if anyone is interested

Contingent on me going, obviously, I will bring an Explorer intake and heads for a potential trade... I would have to see the heads before I would commit to anything.

[gabegt90]

I have like 4 sets of p71 towers p72 dog dishes

[85crownHPP]

Oooohhh bring the dog dishes!!!

[1980c10]

Just went and looked at the heads I forgot they had been damaged and repaired. The previous owner had run pushrods that where to short with roller rockers which caused the roller tip to rest on the side of the valve stem putting tremendous pressure on the rocker studs which caused the area where the studs screw into to crack. Anyway all the valves and studs where replaced and the cracks where repaired by a professional welded then take to a machine shop where the stud mounting surface was machined flat.

Just a heads up for anyone interested I like to be upfront about everything I sell.

[SVT98t]

Tom, that should be enough fluid. As for the drain plug, we'll have to check. Not sure which ones had it.

-ryan s.

[zoomie]

still collecting goodies , this might be best sf yet

[SVT98t]

I have 8 or 10 (can't remember, will confirm later) #194 4-bulb red LEDs. We'll wheel and deal at Scotts.

-ryan s.

[MattsLincoln]

I have 8 or 10 (can't remember, will confirm later) #194 4-bulb red LEDs. We'll wheel and deal at Scotts.

-ryan s.

will those fit the socket on our door lights and opera lights and the dome light if so i would like to buy them from you.

[85crownHPP]

If they are the 4-led ones I'm thinking of, they are very directional and don't work well in most interior lights.

[MattsLincoln]

If they are the 4-led ones I'm thinking of, they are very directional and don't work well in most interior lights.

bring your leds pete i want to buy some from you. i want red leds for my car so bring a bunch.

[SVT98t]

They are quite directional. I bought a bunch to do the Marauder, then decided red wasn't it. I'll still bring them. But they are, "Straight shooters".
They are prime for instrument clusters.

-ryan s.

[86VickyLX]

will those fit the socket on our door lights and opera lights and the dome light if so i would like to buy them from you.

yes