I am always late to post STAP info on here so here it is. Well in advance. It's still in the planning stages but it will happen again in St. Thomas.
Announcement
Collapse
No announcement yet.
Stap 2014
Collapse
X
-
I'll be there as per usual.2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIP
-
I'm there! Probably bringing the Sand Box. I'll deserve a kick in the ass if I don't have the HO upper/TB on by then!Last edited by RyPow; 12-18-2013, 10:19 AM.RyPow
1987 LTD Crown Victoria LX sedan - The "Sand Box" - 73K, towing package
1987 LTD Crown Victoria LX Tutone Tudor - '96 Explorer 5.0 + 5spd swap in the works
1985 Lincoln Town Car Cartier - previously owned by "navguy12" from thelincolnforum.net
2007 Lincoln Town Car Signature Limited, 102k, daily driver
2006 Mercury Grand Marquis LS, 115k, winter beats
1977 Lincoln Continental Town Car, 42k
2012 F-150 5.0L 4x4, HD payload pkg (towing/hauling)
2015 Toyota RAV4 XLE AWD (better half's)
Comment
-
Can't wait for the auto crossing. No idea what toilet I'll bring, but I'll be sure to make a fool out of myself.2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIP
Comment
-
I'm considering going. You need a passport to get into Canada these days right?
What gear would I need to go down the strip? A helmet of some kind obviously. But what kind? I have an ancient one that my uncle gave me.1990 MGM: $50 E7 heads, HO cam, Holley SysteMAX lower intake, HO upper intake with an Explorer TB. LSC ECM. Lincoln logs into stock dual exhaust. K&N drop in air filter. Wide ratio AOD, 2400 converter with a 3.08 one tire fire out back. Car is less slow now. Then there's the '92 Beater. Dual 2.25" exhaust with shiny tips. Rumbles nice. Super slow. Burns oil too.
Comment
-
Originally posted by HiFiMerc View PostI'm considering going. You need a passport to get into Canada these days right?
What gear would I need to go down the strip? A helmet of some kind obviously. But what kind? I have an ancient one that my uncle gave me.
We use empty beer cans for helmets.2020 F250 - 7.3 4x4 CCSB STX 3.55's - BAKFlip MX4
2005 Grand Marquis GS - Marauder sway bars, Marauder exhaust, KYB's
2003 Marauder - Trilogy # 8, JLT, kooks, 2.5" exhaust, 4.10's/31 spline, widened rear's, metco's, addco's, ridetech's 415hp/381tq
1987 Colony Park - 03+ frame swap, blown Gen II Coyote, 6R80, ridetechs, stainless works, absolute money pit. WIP
Comment
-
You will need a passport or an enhanced driver's license to enter Canada by land. You do not need a helmet unless you are running 13.99 or faster in 1/4 at the drag strip. Helmet specs are according to the NHRA rules. Most of the time however, if you have any helmet as long as it's not a bicycle helmet, you will be ok. I've been using a motorcycle helmet for years.
You will need a helmet for auto crossing however and that one has to be at least Snell M2005 (a lot of DOT rated helmets are not eligible). They are pretty strict when it comes to this. I imagine you could use same helmet for the drag strip.
Comment
-
Cool, so just show up and floor it!
Don't think I'd be doing any auto-crossing. My single hollow sway bar would hate me
Sounds like an enhanced license would be the way to go for me. I'm not setting foot on an airplane anyway.1990 MGM: $50 E7 heads, HO cam, Holley SysteMAX lower intake, HO upper intake with an Explorer TB. LSC ECM. Lincoln logs into stock dual exhaust. K&N drop in air filter. Wide ratio AOD, 2400 converter with a 3.08 one tire fire out back. Car is less slow now. Then there's the '92 Beater. Dual 2.25" exhaust with shiny tips. Rumbles nice. Super slow. Burns oil too.
Comment
Comment